If you have just installed an automatic gate on your property, then you likely have experienced the convenience and security that comes with it.
However, like any technological addition to your house, your autogate will likely exhibit some problems after years of use. As such, regular autogate servicing is important to keep it in good working order if you want to continue to enjoy the benefits of having them.
This article will shed light on how often you should service your autogate, the type of services that should be included as well as how long you can expect your automatic gate to last.
The frequency of your autogate maintenance services will vary depending on how often you use your gate and the type of gate that you have. Hence, you should consult a professional for the best advice on what your requirements are.
That said, an autogate should be serviced at least every six months for it to function properly. The service should include all necessary maintenance tasks such as greasing the hinges or replacing worn parts.
Autogate maintenance services are important for the safety of your home and family. Hence, it should include a wide range of tasks that should be done to keep your autogate in tip-top condition.
A good autogate maintenance service should include:
Automatic gates are a great investment for any homeowner as they provide safety and security to the people living on the property. As such, regular inspection of the autogate is necessary to ensure that it is functioning well without any issue.
For instance, the gate post needs to be plumb and hinges need to be aligned vertically. When the gate/post is not plumb, it may surge/hesitate in a particular direction of its travel and possibly fail to function.
Your automatic gate is installed as part of your house’s exterior, which works as a protective barrier against unauthorised entry or unknown incidents. This also means that it is susceptible to Malaysia’s tropical weather.
With the constant exposure to the sun and rain, you should expect to see some form of corrosion on your autogate. It can be on the hinges where it is highly visible or on the battery terminals and connectors of your autogate’s motor.
This is a simple yet effective form of maintenance. So, make sure to clean your autogate once every year while performing minor cleaning when necessary. After all, it is the first thing that your guests will notice when they visit your home.
With regular lubrication on the important parts such as the chain, pulley, wheels, hinges, screws, etc., you can lengthen the lifespan of your autogate because these are the parts that make your gate work. You should also replace the worn parts when necessary.
One of the reasons why your automatic gate acts up is that it might not be getting enough power. This is something that could be brought about by problems with the main switch, a faulty transmitter battery, defective wiring, or issues with the gate’s peripheral equipment.
The key to resolving these issues is to inspect everything that is working properly. That way, you can easily pinpoint the problem. Begin with the main switch and ensure that it is switched on. Check the wiring or transmitter battery to see if it is damaged. If you find that either is damaged, it’s best to contact your autogate installer and have it replaced.
Just like every other part of your house, autogates require regular maintenance to function properly for as long as possible. That’s why it’s important that your automatic gate maintenance include routine inspections, repairs, and replacement parts.
If you’re looking for an automatic gate maintenance service for your home, consider engaging
The One Control to service your autogate. With more than 20 years of experience in the security industry, you can be assured of our team of professionals in both services and security products.
No. 113-1 , Jalan PUJ 3/3 , Puncak Jalil 43300 Seri Kembangan, Selangor.
Monday - Friday 9AM - 5PM
Saturday 9AM - 12PM
Sunday Closed
info@autogatec.com